Cupro Nickel Finned Tubes

Product Details:

We are manufacturers of Export Quality Cupro Nickel Pipes, available in grades and we undertake bulk orders also owing to our manufacturing capacity

Product Details:

Brake pipe coils available in copper & 90/10 copper-nickel material manufactured to BSEN 12449 CWO24A and CW352 H respectively. Coils are available in metric & imperial sizes along with 20 or 22 gauge thickness.

Seamless tubes offering better resistance to corrosion and splitting. Easy to bend, flare & install. 100% electronically & pressure tested for pin holes.

Product Details:

Jugal Metal Corporation Are manufactured in compliance to BS 2871, Part 1 now superseded by the new European standard EN:1057 for Water, Gas and Sanitation .The BS 2871 specifies 3 wall thickness suitable for hot and cold water installations under Table X, Y & Z (the tables can be downloaded from our web site). Table ‘X’ is the table normally used for plumbing and gas. Tubes are 100% eddy current tested. Mechanical and chemical properties meet the standards of BS 2871, Part 1:1971 or the EN:1057 Tube sizes range from 12 mm to 159 mm. The standard plumbing sizes are (in mm): 15, 22, 28, 35, 42, 54, 66.7, 76.1, 108, 133 & 159. These include types K, L, M and DWV. All tubes supplied to these ASTM standards are a minimum of 99.90 percent pure copper. These classes and types of tubes are commercially available in the tempers and lengths described in the Plumbing tube product range chart. Types K, L, M and DWV are designated by ASTM standard size, with outside diameter always 1/8" larger than the standard size. Each type (K, L, M and DWV) represents a series of sizes with different wall thickness. The inside diameter depends on tube size and wall-thicknesses. All four types are available in drawn temper straight lengths 20 feet long. Type K, L and M are available also in annealed temper in 8 feet straight lengths or in long coils in sizes from 1/4 inch to 7/8 inch. We in India, manufacture plumbing tubes to meet specifications established by the American Society for Testing and Materials (ASTM).

A modern application of an ancient principle radiant panel heating can be used successfully in nearly all types of structures In panel systems low temperature hot water circulating through coils or grids of copper tube embedded in a concrete floor or plaster ceiling warms the surfaces and the air Panel systems offer uniform heating and comfort an invisible heat source complete use of the floor area cleanliness and the elimination of dust carrying drafts The copper tube we manufacture finds numerous applications in Heating and Solar Panels For steam heating systems especially return lines the outstanding corrosion resistance and non rusting characteristics of copper tube assure trouble free service and maintenance of traps valves and other devices

Additional Information:

• Minimum Order Quantity: 250 Kg

Huge range of specifications and sizes are readily available LWC Coils are widely used in manufacturing of Condensor Coils Heat Exchangers Air Conditioner Copper Tube Parts U Bends Capillaries Auto Mobile Refrigeration parts HVAC Industry Water Dispenser Copper Parts etc We stock a huge range of LWC sizes which cater to almost all the applications

Additional Information:

• Minimum Order Quantity: 250 Kilogram

Product Details:

70/30 Cupro Nickel is mainly preferred when the severity of service condition (Cooling water, steam, condensate, temperature, etc.) is such as to virtually rule out all other copper metals.

Due to its hardness and to the type of oxide whereby its surface is self-protected, 70/30 Cupro Nickel has excellent resistance to impingement and erosion-corrosion by of suspended solids in sea water flowing at up to 3-3.5 m/s (10-11.5 ft /s).

Like all Cupro-nickels, 70/30 Cupro Nickel is virtually immune from stress-corrosion cracking.

It can be very sensitive to deposit attack and is therefore not recommended for stagnant or slow moving (under 1 – 1.2 m/s or 3.5-4 ft/s) water.

Product Details:

90/10 Cupro Nickel is widely used in sea water. It has very good corrosion resistance to clean moderately polluted marine or estuary water, even containing dissolved incondensable gases.This alloy is virtually immune from stress-corrosion cracking and hot spot denickelification.In clean sea water, a velocity of up 2.2-2.5 m/s (7.5-8.5 ft/s) is accepted while 4 m/s (13 ft/s) is the upper limit for clean fresh or slightly saline solutions.

Product Details:

We specialize in offering Cupro Nickel Pipe Fittings in different dimensions and technical specifications.

These are fabricated using innovative technology, top class raw material and efficient machines.

Our flawless range is precisely engineered thus comply with the industrial norms and standards.

Being durable and reliable, these forged pipe fittings are widely used in different industrial application.